Registered with the United States Patent Office


"The Most Realistic Flame Effect There Is, Period."

The W.T. Kirkman #F110 FAUXFLAME Module


The flame effect you've unknowingly seen at amusement parks and in motion pictures is now available direct to the general public. The W. T. Kirkman #F110 FAUXFLAME module uses microchip technology to simulate the look of a real flame using any standard light bulb. When used with frosted glass to hide the light bulb, only you will know that you aren't burning kerosene. Dual brightness and flicker controls allow you to obtain the exact flame look you desire. Perfect for use in electrified kerosene or candle lanterns. The optional By-Pass mode allows the user to bring the fixture to full brightness by simply interrupting the power for 1 second. After the lamp is turned off, it will resume the flicker effect the next time it is turned on. The W. T. Kirkman #F110 FAUXFLAME module is designed for professional installation only, and should only be installed by those familiar with electric circuitry and safety.




120 Volts, AC
10 Watt Minimum
200 Watt Maximum
12 Volts, AC
12 Volts, DC
25 Watt Maximum
Incandescent Load Only

Module Dimensions:
2 3/8" x 1 3/8" x 13/16"


Toll Free Info
and Order Line: 





This Page was Updated on September 21, 2014

The Fauxflame
Effect Module is Available From:


Birket Engineering Inc.


Conditions Of Use             COPYRIGHT 1997 - 2014  W.T. Kirkman   ALL RIGHTS RESERVED          Contact Us